The Family Jewels

My favorite blogger @thepioneerwoman has been posting solutions to her jewelry storage dilemma on her blog.  I thought I'd show you what I did to deal with my jewelry.  It's a DIY that I talked about doing for a long time and finally did about a year ago.  I don't have progress photos because I didn't think I'd ever have a need to show anyone what I did.

I shopped around until I found a wall hung medicine cabinet that I liked.  I found this one at Target for about $50.

I set one shelf in the cabinet and measured the back wall and the inside of the door.

Using the measurements  of the back wall dimensions I cut thin foam core and covered it with thin batting and some left over black velvet I had.  I then covered the panels with solar screening (from the hardware store) that I had left over from when we replaced our screens.  This gave me a place to attach pins and brooches.  I glued the panels on the back of the cabinet using a hot glue gun.
For the inside of the door, I cut a thin piece of foam core and covered it with the velvet and screen, leaving out the batting.  This gives me lots of places to hang earrings.  On the inside of the door were screws holding the mirror in place.  I removed them, laid the panel in place and then screwed them back in holding the panel.  It took a little jiggering, but I eventually got it to work.

I then screwed tiny cup hooks on the underside of the shelf to give me hanging space for necklaces.

The final touch was to add a wire across the door panel for earrings with lobster claw type closures.  It was easier to hang these kind of earrings on the line rather than in the screen mesh.I hung it on the wall and viola!  A sweet jewelry holder with a mirror on front.

Now I don't have to look at the mess, I just close the door and its gone!  Perfect!!